| HWiNFO32 v4.24-2000 |
| Creation Time | 05.10.2013 00:07 |
| NVIDIA |
| [Current Computer] | ||
| Computer Name: | NVIDIA | |
| [Operating System] | ||
| Operating System: | Microsoft Windows 98 | |
| Current User Name: | STAS | |
| Central Processor(s) |
| [CPU Unit Count] | ||
 | Number Of Processor Packages (Physical): | 1 | |
| Number Of Processors Cores: | 1 | |
| Number Of Logical Processors: | 1 | |
| AMD Athlon 64 FX-57 |
| [General Information] | ||
| Processor Name: | AMD Athlon 64 FX-57 | |
 | Current Processor Frequency: | 2813.7 MHz | |
 | Current Processor Frequency [MHz]: | 2814 | |
| CPU ID: | 00020F71 | |
| Extended CPU ID: | 00020F71 | |
| CPU Brand Name: | AMD Athlon(tm) 64 FX-57 Processor | |
| CPU Vendor: | AuthenticAMD | |
| CPU Stepping: | SH-E4 | |
| CPU Code Name: | San Diego | |
| CPU Platform: | Socket 939 | |
| Number of CPU Cores: | 1 | |
| Number of Logical CPUs: | 1 | |
| [Operating Points] | ||
| CPU HFM (Maximum): | [Unlimited] | |
| CPU Current: | 2813.7 MHz = 14.00 x 201.0 MHz @ 1.4000 V | |
 | CPU Bus Type: | Hyper-Transport v1.02 | |
| Maximum Supported Hyper-Transport Link Clock: | 1000 MHz | |
| Current Hyper-Transport Link Clock: | 1000 MHz | |
| [Cache and TLB] | ||
| L1 Cache: | Instruction: 64 KBytes, Data: 64 KBytes | |
| L2 Cache: | Integrated: 1 MBytes | |
| Instruction TLB: | Fully associative, 32 entries | |
| Data TLB: | Fully associative, 32 entries | |
| [Standard Feature Flags] | ||
 | FPU on Chip | Present | |
| Enhanced Virtual-86 Mode | Present | |
| I/O Breakpoints | Present | |
| Page Size Extensions | Present | |
| Time Stamp Counter | Present | |
| Pentium-style Model Specific Registers | Present | |
| Physical Address Extension | Present | |
| Machine Check Exception | Present | |
| CMPXCHG8B Instruction | Present | |
| APIC On Chip / PGE (AMD) | Present | |
| Fast System Call | Present | |
| Memory Type Range Registers | Present | |
| Page Global Feature | Present | |
| Machine Check Architecture | Present | |
| CMOV Instruction | Present | |
| Page Attribute Table | Present | |
| 36-bit Page Size Extensions | Present | |
 | Processor Number | Not Present | |
| CLFLUSH Instruction | Present | |
| Debug Trace and EMON Store | Not Present | |
| Internal ACPI Support | Not Present | |
| MMX Technology | Present | |
| Fast FP Save/Restore (IA MMX-2) | Present | |
| Streaming SIMD Extensions | Present | |
| Streaming SIMD Extensions 2 | Present | |
| Self-Snoop | Not Present | |
| Multi-Threading Capable | Not Present | |
| Automatic Clock Control | Not Present | |
| IA-64 Processor | Not Present | |
| Signal Break on FERR | Not Present | |
| Streaming SIMD Extensions 3 | Present | |
| PCLMULQDQ Instruction Support | Not Present | |
| MONITOR/MWAIT Support | Not Present | |
| Supplemental Streaming SIMD Extensions 3 | Not Present | |
| FMA Extension | Not Present | |
| CMPXCHG16B Support | Not Present | |
| Streaming SIMD Extensions 4.1 | Not Present | |
| Streaming SIMD Extensions 4.2 | Not Present | |
| x2APIC | Not Present | |
| POPCNT Instruction | Not Present | |
| AES Cryptography Support | Not Present | |
| XSAVE/XRSTOR/XSETBV/XGETBV Instructions | Not Present | |
| XGETBV/XSETBV OS Enabled | Not Present | |
| AVX Support | Not Present | |
| Half-Precision Convert (CVT16) | Not Present | |
| [Extended Feature Flags] | ||
| FPU on Chip | Present | |
| Enhanced Virtual-86 Mode | Present | |
| I/O Breakpoints | Present | |
| Page Size Extensions | Present | |
| Time Stamp Counter | Present | |
| AMD-style Model Specific Registers | Present | |
| Machine Check Exception | Present | |
| CMPXCHG8B Instruction | Present | |
| APIC On Chip | Present | |
| SYSCALL and SYSRET Instructions | Present | |
| Memory Type Range Registers | Present | |
| Page Global Feature | Present | |
| Machine Check Architecture | Present | |
| CMOV Instruction | Present | |
| Page Attribute Table | Present | |
| 36-bit Page Size Extensions | Present | |
| Multi-Processing / Brand feature | Not Present | |
| No Execute | Present | |
| MMX Technology | Present | |
| MMX+ Extensions | Present | |
| Fast FP Save/Restore | Present | |
| Fast FP Save/Restore Optimizations | Present | |
| 1 GB large page support | Not Present | |
| RDTSCP Instruction | Not Present | |
| x86-64 Long Mode | Present | |
| 3DNow! Technology Extensions | Present | |
| 3DNow! Technology | Present | |
| LAHF/SAHF Long Mode Support | Present | |
| Core Multi-Processing Legacy Mode | Not Present | |
| Secure Virtual Machine | Not Present | |
| Extended APIC Register Space | Not Present | |
| LOCK MOV CR0 Support | Not Present | |
| Advanced Bit Manipulation | Not Present | |
| SSE4A Support | Not Present | |
| Misaligned SSE Mode | Not Present | |
| PREFETCH(W) Support | Not Present | |
| OS Visible Work-around Support | Not Present | |
| Instruction Based Sampling | Not Present | |
| XOP Instruction Support | Not Present | |
| SKINIT, STGI, and DEV Support | Not Present | |
| Watchdog Timer Support | Not Present | |
| TBM0 Instruction Support | Not Present | |
| Lightweight Profiling Support | Not Present | |
| FMA4 Instruction Support | Not Present | |
| Translation Cache Extension | Not Present | |
| NodeId Support | Not Present | |
| Trailing Bit Manipulation | Not Present | |
| Topology Extensions | Not Present | |
| Core Performance Counter Extensions | Not Present | |
| NB Performance Counter Extensions | Not Present | |
| Streaming Performance Monitor Architecture | Not Present | |
| Data Breakpoint Extension | Not Present | |
| Performance Time-Stamp Counter | Not Present | |
| L2I Performance Counter Extensions | Not Present | |
| [Enhanced Features] | ||
| Core Performance Boost | Not Supported | |
| [Memory Ranges] | ||
 | Maximum Physical Address Size: | 40-bit (1 TBytes) | |
| Maximum Virtual Address Size: | 48-bit (256 TBytes) | |
| [MTRRs] | ||
| Range 0-F040000000 (0MB-984064MB) Type: | Write Back (WB) | |
| Range E0000000-F0F0000000 (3584MB-986880MB) Type: | Write Combining (WC) | |
| Range F0000000-F0F1000000 (3840MB-986896MB) Type: | Write Combining (WC) | |
| Range F1000000-F0F2000000 (3856MB-986912MB) Type: | Uncacheable (UC) | |
| Motherboard |
| [Computer] | ||
| Computer Brand Name: | Unknown on Noname | |
| [Motherboard] | ||
 | Motherboard Model: | GIGABYTE nForce | |
 | Motherboard Chipset: | nVidia nForce3 250 (Crush K8S2) + CK8S MCP2-S | |
 | Motherboard Slots: | 5xPCI, 1xAGP v3.0 | |
 | USB Version Supported: | v2.0 | |
| [BIOS] | ||
 | BIOS Manufacturer: | Award Modular BIOS v6.00PG | |
| BIOS Date: | 10/23/08 | |
| BIOS Version: | F11k | |
| EFI BIOS: | Not Capable | |
| Super-IO/LPC Chip: | Unknown | |
| SMBIOS DMI |
| BIOS |
| BIOS Vendor: | Award Software International, Inc. | |
| BIOS Version: | F11k | |
| BIOS Release Date: | 10/23/2008 | |
| BIOS Start Segment: | E000 | |
| BIOS Size: | 512 KBytes | |
| ISA Support: | Not Present | |
| MCA Support: | Not Present | |
| EISA Support: | Not Present | |
| PCI Support: | Present | |
| PC Card (PCMCIA) Support: | Not Present | |
| Plug-and-Play Support: | Present | |
| APM Support: | Present | |
| Flash BIOS: | Present | |
| BIOS Shadow: | Present | |
| VL-VESA Support: | Not Present | |
| ESCD Support: | Not Present | |
| Boot from CD: | Present | |
| Selectable Boot: | Present | |
| BIOS ROM Socketed: | Present | |
| Boot from PC Card: | Not Present | |
| EDD Support: | Present | |
| NEC PC-98 Support: | Not Present | |
| ACPI Support: | Present | |
| USB Legacy Support: | Present | |
| AGP Support: | Present | |
| I2O Boot Support: | Not Present | |
| LS-120 Boot Support: | Present | |
| ATAPI ZIP Drive Boot Support: | Present | |
| IEE1394 Boot Support: | Not Present | |
| Smart Battery Support: | Not Present | |
| BIOS Boot Specification Support: | Present | |
| Function key-initiated Network Service Boot Support: | Not Present | |
| Targeted Content Distribution Support: | Not Present | |
| UEFI Specification Support: | Not Present |
| System |
| System Manufacturer: | ||
| Product Name: | ||
| Product Version: | ||
| Product Serial Number: |
| Mainboard |
| Mainboard Manufacturer: | Gigabyte Technology Co., Ltd. | |
| Mainboard Name: | nForce | |
| Mainboard Version: | ||
| Mainboard Serial Number: |
| System Enclosure |
| Manufacturer: | ||
| Case Type: | Desktop | |
| Version: | ||
| Serial Number: | ||
| Asset Tag Number: |
| Processor |
| Processor Manufacturer: | AMD | |
| Processor Version: | AMD Athlon(tm) 64 FX-57 Processor | |
| External Clock: | 200 MHz | |
| Maximum Clock Supported: | 3200 MHz | |
| Current Clock: | 2800 MHz | |
| CPU Socket: | Populated | |
| CPU Status: | Enabled | |
| Processor Type: | Central Processor | |
 | Processor Voltage: | 1.7 V | |
| Processor Upgrade: | Socket 939 | |
| Socket Designation: | Socket 939 |
| Memory Devices |
| Memory Controller |
 | Error Detecting Method: | 64-bit ECC | |
| Error Correction: | None | |
| Supported Interleave: | 1-Way | |
| Current Interleave: | 1-Way | |
| Max. Memory Module Size: | 1024 MBytes | |
| Supported Memory Speed: | 70 ns, 60 ns | |
| Supported Memory Type: | SPM, EDO | |
| Supported Memory Voltage: | 5 V | |
| Associated Memory Slots: | 3 |
| A0 |
| Socket Designation: | A0 | |
| Memory Type: | EDO | |
| Memory Speed: | Unknown | |
| Installed size: | 256 MBytes | |
| Enabled size: | 256 MBytes |
| A1 |
| Socket Designation: | A1 | |
| Memory Type: | EDO | |
| Memory Speed: | Unknown | |
| Installed size: | 256 MBytes | |
| Enabled size: | 256 MBytes |
| ÃËh |
| Socket Designation: | ÃËh | |
| Memory Type: | EDO | |
| Memory Speed: | Unknown | |
| Installed size: | 256 MBytes | |
| Enabled size: | 256 MBytes |
| Internal Cache |
| Socket Designation: | Internal Cache | |
| Cache State: | Enabled | |
| Cache Type: | Internal | |
| Cache Scheme: | Write-Back | |
| Supported SRAM Type: | Synchronous | |
| Current SRAM Type: | Synchronous | |
| Cache Speed: | Unknown | |
| Error Correction Type: | Unknown | |
| Maximum Cache Size: | 128 KBytes | |
| Installed Cache Size: | 128 KBytes | |
| Cache Associativity: | Unknown |
| External Cache |
| Socket Designation: | External Cache | |
| Cache State: | Enabled | |
| Cache Type: | Internal | |
| Cache Scheme: | Write-Back | |
| Supported SRAM Type: | Synchronous | |
| Current SRAM Type: | Synchronous | |
| Cache Speed: | Unknown | |
| Error Correction Type: | Unknown | |
| Maximum Cache Size: | 1024 KBytes | |
| Installed Cache Size: | 1024 KBytes | |
| Cache Associativity: | Unknown |
| Port Connectors |
| Port Connector |
 | Port Type: | Unknown | |
| Internal Reference: | PRIMARY IDE | |
| Internal Connector Type: | On Board IDE | |
| External Reference: | ||
| External Connector Type: | None |
| Port Connector |
| Port Type: | Unknown | |
| Internal Reference: | SECONDARY IDE | |
| Internal Connector Type: | On Board IDE | |
| External Reference: | ||
| External Connector Type: | None |
| 8251 FIFO Compatible |
| Port Type: | 8251 FIFO Compatible | |
| Internal Reference: | FDD | |
| Internal Connector Type: | On Board Floppy | |
| External Reference: | ||
| External Connector Type: | None |
| Serial Port 16450 Compatible |
| Port Type: | Serial Port 16450 Compatible | |
| Internal Reference: | COM1 | |
| Internal Connector Type: | 9 Pin Dual Inline (pin 10 cut) | |
| External Reference: | ||
| External Connector Type: | DB-9 pin male |
| Serial Port 16450 Compatible |
| Port Type: | Serial Port 16450 Compatible | |
| Internal Reference: | COM2 | |
| Internal Connector Type: | 9 Pin Dual Inline (pin 10 cut) | |
| External Reference: | ||
| External Connector Type: | DB-9 pin male |
| Parallel Port ECP/EPP |
| Port Type: | Parallel Port ECP/EPP | |
| Internal Reference: | LPT1 | |
| Internal Connector Type: | DB25 pin female | |
| External Reference: | ||
| External Connector Type: | DB25 pin female |
| Keyboard Port |
| Port Type: | Keyboard Port | |
| Internal Reference: | Keyboard | |
| Internal Connector Type: | Unknown | |
| External Reference: | ||
| External Connector Type: | PS/2 |
| Mouse Port |
| Port Type: | Mouse Port | |
| Internal Reference: | PS/2 Mouse | |
| Internal Connector Type: | PS/2 | |
| External Reference: | Detected | |
| External Connector Type: | PS/2 |
| USB |
| Port Type: | USB | |
| Internal Reference: | USB | |
| Internal Connector Type: | None | |
| External Reference: | ||
| External Connector Type: | Access Bus (USB) |
| System Slots |
| PCI |
| Slot Designation: | PCI | |
| Slot Type: | PCI | |
| Slot Usage: | Empty | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| PCI |
| Slot Designation: | PCI | |
| Slot Type: | PCI | |
| Slot Usage: | Empty | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| PCI |
| Slot Designation: | PCI | |
| Slot Type: | PCI | |
| Slot Usage: | Empty | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| PCI |
| Slot Designation: | PCI | |
| Slot Type: | PCI | |
| Slot Usage: | Empty | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| PCI |
| Slot Designation: | PCI | |
| Slot Type: | PCI | |
| Slot Usage: | In use | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| AGP |
| Slot Designation: | AGP | |
| Slot Type: | AGP | |
| Slot Usage: | In use | |
| Slot Data Bus Width: | 32-bit | |
| Slot Length: | Long |
| BIOS Language |
| n|US|iso8859-1 <Active> | ||
| n|US|iso8859-1 | ||
| r|CA|iso8859-1 |
| Physical Memory Array |
| Array Location: | System board | |
| Array Use: | System memory | |
| Error Detecting Method: | None | |
| Memory Capacity: | 1572864 KBytes | |
| Memory Devices: | 3 |
| Memory Device |
| Total Width: | 64 bits | |
| Data Width: | 64 bits | |
| Device Size: | 256 MBytes | |
| Device Form Factor: | DIMM | |
| Device Locator: | A0 | |
| Bank Locator: | Bank0/1 | |
| Device Type: | Unknown | |
| Device Type Detail: | ||
| Memory Speed: | 200 MHz | |
| Manufacturer: | None | |
| Serial Number: | None | |
| Part Number: | None | |
| Asset Tag: | None |
| Memory Device |
| Total Width: | 64 bits | |
| Data Width: | 64 bits | |
| Device Size: | 256 MBytes | |
| Device Form Factor: | DIMM | |
| Device Locator: | A1 | |
| Bank Locator: | Bank2/3 | |
| Device Type: | Unknown | |
| Device Type Detail: | ||
| Memory Speed: | 200 MHz | |
| Manufacturer: | None | |
| Serial Number: | None | |
| Part Number: | None | |
| Asset Tag: | None |
| Memory Device |
| Total Width: | 64 bits | |
| Data Width: | 64 bits | |
| Device Size: | 256 MBytes | |
| Device Form Factor: | DIMM | |
| Device Locator: | ÃËh | |
| Bank Locator: | Bank4/5 | |
| Device Type: | Unknown | |
| Device Type Detail: | ||
| Memory Speed: | 200 MHz | |
| Manufacturer: | None | |
| Serial Number: | None | |
| Part Number: | None | |
| Asset Tag: | None |
| Memory Array Mapped Address |
| Starting Address: | 00000000 | |
| Ending Address: | 000FFFFF | |
| Partition Width: | 1 |
| Memory Device Mapped Address |
| Starting Address: | 00000000 | |
| Ending Address: | 0003FFFF | |
| Partition Row Position: | 1 | |
| Interleave Position: | Non-interleaved | |
| Interleave Data Depth: | 0 |
| Memory Device Mapped Address |
| Starting Address: | 00040000 | |
| Ending Address: | 0007FFFF | |
| Partition Row Position: | 1 | |
| Interleave Position: | Non-interleaved | |
| Interleave Data Depth: | 0 |
| Memory Device Mapped Address |
| Starting Address: | 00080000 | |
| Ending Address: | 000BFFFF | |
| Partition Row Position: | 1 | |
| Interleave Position: | Non-interleaved | |
| Interleave Data Depth: | 0 |
| System Boot Information |
| Boot Status: | No error occured |
| Memory |
| [General information] | ||
| Total Memory Size: | 1 GByte | |
| Total Memory Size [MB]: | 1024 | |
| [Current Performance Settings] | ||
| Current Memory Clock: | 201.0 MHz | |
| Current Timing (tCAS-tRCD-tRP-tRAS): | 3.0-3-3-8 | |
| Memory Runs At: | Dual-Channel | |
| Write to Precharge Delay (tWTP): | 14T | |
| Write Recovery Time (tWR): | 3T | |
| RAS# to RAS# Delay (tRRD): | 11T | |
| Row Cycle Time (tRC): | 11T | |
| Refresh Cycle Time (tRFC): | 14T | |
| Row: 0 - 256 MB PC3200 DDR-SDRAM Kingston K |
| [General Module Information] | ||
| Module Number: | 0 | |
| Module Size: | 256 MBytes | |
| Memory Type: | DDR-SDRAM | |
| Error Check/Correction: | None | |
| Memory Speed: | 200.0 MHz (PC3200) | |
| Module Manufacturer: | Kingston | |
| Module Model: | K | |
| Serial Number: | 3370717792 | |
| Manufacturing Date: | Year: 2004, Week: 36 | |
| [Module Characteristics] | ||
| Module Width: | 64-bits | |
| Module Voltage: | SSTL 2.5V | |
| SPD Revision: | N/A | |
| Number Of Rows: | 1 | |
| Row Address Bits: | 13 | |
| Column Address Bits: | 10 | |
| Number Of Banks: | 4 | |
| [Module timing] | ||
| Supported Burst Lengths: | 2, 4, 8 | |
| Refresh Rate: | Reduced 0.5x (7.8 us) | |
| Min. Back-to-Back Clock Delay: | 1 | |
| Supported CAS Latencies (tCAS): | 3.0, 2.5, 2.0 | |
| Min. RAS-to-CAS Delay (tRCD): | 14.00 ns | |
| Min. Row Precharge Time (tRP): | 14.00 ns | |
| Min. RAS Pulse Width (tRAS): | 40 ns | |
| Supported Module Timing at 200.0 MHz: | 3.0-3-3-8 | |
| Supported Module Timing at 166.7 MHz: | 2.5-3-3-7 | |
| Supported Module Timing at 133.3 MHz: | 2.0-2-2-6 | |
| Min. Row-Activate To Row-Activate Delay (tRRD): | 10.00 ns | |
| Supported CS Latency: | 0 | |
| Supported WE Latency: | 1 | |
| [Features] | ||
| Buffered Address/Control Inputs: | Not Supported | |
| Registered Address/Control Inputs: | Not Supported | |
| On-card PLL For Clock: | Not Supported | |
| Buffered DQMB Inputs: | Not Supported | |
| Registered DQMB Inputs: | Not Supported | |
| Differential Clock Input: | Supported | |
| Redundant Row Address: | Not Supported | |
| Row: 1 - 256 MB PC3200 DDR-SDRAM Kingston K |
| [General Module Information] | ||
| Module Number: | 1 | |
| Module Size: | 256 MBytes | |
| Memory Type: | DDR-SDRAM | |
| Error Check/Correction: | None | |
| Memory Speed: | 200.0 MHz (PC3200) | |
| Module Manufacturer: | Kingston | |
| Module Model: | K | |
| Serial Number: | 1528106381 | |
| Manufacturing Date: | Unknown | |
| [Module Characteristics] | ||
| Module Width: | 64-bits | |
| Module Voltage: | SSTL 2.5V | |
| SPD Revision: | N/A | |
| Number Of Rows: | 1 | |
| Row Address Bits: | 13 | |
| Column Address Bits: | 10 | |
| Number Of Banks: | 4 | |
| [Module timing] | ||
| Supported Burst Lengths: | 2, 4, 8 | |
| Refresh Rate: | Reduced 0.5x (7.8 us) | |
| Min. Back-to-Back Clock Delay: | 1 | |
| Supported CAS Latencies (tCAS): | 3.0, 2.5, 2.0 | |
| Min. RAS-to-CAS Delay (tRCD): | 14.00 ns | |
| Min. Row Precharge Time (tRP): | 14.00 ns | |
| Min. RAS Pulse Width (tRAS): | 40 ns | |
| Supported Module Timing at 200.0 MHz: | 3.0-3-3-8 | |
| Supported Module Timing at 166.7 MHz: | 2.5-3-3-7 | |
| Supported Module Timing at 133.3 MHz: | 2.0-2-2-6 | |
| Min. Row-Activate To Row-Activate Delay (tRRD): | 10.00 ns | |
| Supported CS Latency: | 0 | |
| Supported WE Latency: | 1 | |
| [Features] | ||
| Buffered Address/Control Inputs: | Not Supported | |
| Registered Address/Control Inputs: | Not Supported | |
| On-card PLL For Clock: | Not Supported | |
| Buffered DQMB Inputs: | Not Supported | |
| Registered DQMB Inputs: | Not Supported | |
| Differential Clock Input: | Supported | |
| Redundant Row Address: | Not Supported | |
| Row: 2 - 256 MB PC3200 DDR-SDRAM Kingston K |
| [General Module Information] | ||
| Module Number: | 2 | |
| Module Size: | 256 MBytes | |
| Memory Type: | DDR-SDRAM | |
| Error Check/Correction: | None | |
| Memory Speed: | 200.0 MHz (PC3200) | |
| Module Manufacturer: | Kingston | |
| Module Model: | K | |
| Serial Number: | 1151281028 | |
| Manufacturing Date: | Year: 2002, Week: 20 | |
| [Module Characteristics] | ||
| Module Width: | 64-bits | |
| Module Voltage: | SSTL 2.5V | |
| SPD Revision: | N/A | |
| Number Of Rows: | 1 | |
| Row Address Bits: | 13 | |
| Column Address Bits: | 10 | |
| Number Of Banks: | 4 | |
| [Module timing] | ||
| Supported Burst Lengths: | 2, 4, 8 | |
| Refresh Rate: | Reduced 0.5x (7.8 us) | |
| Min. Back-to-Back Clock Delay: | 1 | |
| Supported CAS Latencies (tCAS): | 3.0, 2.5, 2.0 | |
| Min. RAS-to-CAS Delay (tRCD): | 14.00 ns | |
| Min. Row Precharge Time (tRP): | 14.00 ns | |
| Min. RAS Pulse Width (tRAS): | 40 ns | |
| Supported Module Timing at 200.0 MHz: | 3.0-3-3-8 | |
| Supported Module Timing at 166.7 MHz: | 2.5-3-3-7 | |
| Supported Module Timing at 133.3 MHz: | 2.0-2-2-6 | |
| Min. Row-Activate To Row-Activate Delay (tRRD): | 10.00 ns | |
| Supported CS Latency: | 0 | |
| Supported WE Latency: | 1 | |
| [Features] | ||
| Buffered Address/Control Inputs: | Not Supported | |
| Registered Address/Control Inputs: | Not Supported | |
| On-card PLL For Clock: | Not Supported | |
| Buffered DQMB Inputs: | Not Supported | |
| Registered DQMB Inputs: | Not Supported | |
| Differential Clock Input: | Supported | |
| Redundant Row Address: | Not Supported | |
| Row: 3 - 256 MB PC3200 DDR-SDRAM Kingston K |
| [General Module Information] | ||
| Module Number: | 3 | |
| Module Size: | 256 MBytes | |
| Memory Type: | DDR-SDRAM | |
| Error Check/Correction: | None | |
| Memory Speed: | 200.0 MHz (PC3200) | |
| Module Manufacturer: | Kingston | |
| Module Model: | K | |
| Serial Number: | 3369734779 | |
| Manufacturing Date: | Year: 2004, Week: 36 | |
| [Module Characteristics] | ||
| Module Width: | 64-bits | |
| Module Voltage: | SSTL 2.5V | |
| SPD Revision: | N/A | |
| Number Of Rows: | 1 | |
| Row Address Bits: | 13 | |
| Column Address Bits: | 10 | |
| Number Of Banks: | 4 | |
| [Module timing] | ||
| Supported Burst Lengths: | 2, 4, 8 | |
| Refresh Rate: | Reduced 0.5x (7.8 us) | |
| Min. Back-to-Back Clock Delay: | 1 | |
| Supported CAS Latencies (tCAS): | 3.0, 2.5, 2.0 | |
| Min. RAS-to-CAS Delay (tRCD): | 14.00 ns | |
| Min. Row Precharge Time (tRP): | 14.00 ns | |
| Min. RAS Pulse Width (tRAS): | 40 ns | |
| Supported Module Timing at 200.0 MHz: | 3.0-3-3-8 | |
| Supported Module Timing at 166.7 MHz: | 2.5-3-3-7 | |
| Supported Module Timing at 133.3 MHz: | 2.0-2-2-6 | |
| Min. Row-Activate To Row-Activate Delay (tRRD): | 10.00 ns | |
| Supported CS Latency: | 0 | |
| Supported WE Latency: | 1 | |
| [Features] | ||
| Buffered Address/Control Inputs: | Not Supported | |
| Registered Address/Control Inputs: | Not Supported | |
| On-card PLL For Clock: | Not Supported | |
| Buffered DQMB Inputs: | Not Supported | |
| Registered DQMB Inputs: | Not Supported | |
| Differential Clock Input: | Supported | |
| Redundant Row Address: | Not Supported | |
| Bus |
| PCI Bus #0 |
| nVIDIA nForce3 250 (CK8S) - System Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - System Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - System Controller | |
| Device Class: | Host-to-PCI Bridge | |
 | Revision ID: | A1 | |
| Bus Number: | 0 | |
| Device Number: | 0 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E1&SUBSYS_00000000&REV_A1 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| Memory Base Address 0 | F0000000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - LPC Bridge |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - LPC Bridge | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - LPC Bridge | |
| Device Class: | PCI-to-ISA Bridge | |
| Revision ID: | A2 | |
| Bus Number: | 0 | |
| Device Number: | 1 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E0&SUBSYS_0C111458&REV_A2 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - SMBus Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - SMBus Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - SMBus Controller | |
| Device Class: | SMBus (System Management Bus) | |
| Revision ID: | A1 | |
| Bus Number: | 0 | |
| Device Number: | 1 | |
| Function Number: | 1 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E4&SUBSYS_0C111458&REV_A1 | |
| [System Resources] | ||
| Interrupt Line: | IRQ10 | |
| Interrupt Pin: | INTA# | |
| I/O Base Address 0 | E400 | |
| I/O Base Address 4 | 1C00 | |
| I/O Base Address 5 | 2000 | |
| [Features] | ||
| Bus Mastering: | Disabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller | |
| Device Class: | Universal Serial Bus (USB) | |
| Revision ID: | A1 | |
| Bus Number: | 0 | |
| Device Number: | 2 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E7&SUBSYS_50041458&REV_A1 | |
| [System Resources] | ||
| Interrupt Line: | IRQ11 | |
| Interrupt Pin: | INTA# | |
| Memory Base Address 0 | F7002000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller | |
| Device Class: | Universal Serial Bus (USB) | |
| Revision ID: | A1 | |
| Bus Number: | 0 | |
| Device Number: | 2 | |
| Function Number: | 1 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E7&SUBSYS_50041458&REV_A1 | |
| [System Resources] | ||
| Interrupt Line: | IRQ11 | |
| Interrupt Pin: | INTB# | |
| Memory Base Address 0 | F7003000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller | |
| Device Class: | Universal Serial Bus (USB) | |
| Revision ID: | A2 | |
| Bus Number: | 0 | |
| Device Number: | 2 | |
| Function Number: | 2 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E8&SUBSYS_50041458&REV_A2 | |
| [System Resources] | ||
| Interrupt Line: | IRQ11 | |
| Interrupt Pin: | INTC# | |
| Memory Base Address 0 | F7004000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller |
| [General Information] | ||
 | Device Name: | nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller | |
| Device Class: | IDE Controller | |
| Revision ID: | A2 | |
| Bus Number: | 0 | |
| Device Number: | 8 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E5&SUBSYS_50021458&REV_A2 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| I/O Base Address 4 | F000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - AGP Controller |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - AGP Controller | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - AGP Controller | |
| Device Class: | PCI-to-PCI Bridge | |
| Revision ID: | A2 | |
| Bus Number: | 0 | |
| Device Number: | 11 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 16 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00E2&SUBSYS_00000000&REV_A2 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Not Capable | |
| AGP 8x Bus (PCI Bus #1) |
| GIGABYTE GV-N68U256D |
| [General Information] | ||
 | Device Name: | GIGABYTE GV-N68U256D | |
| Original Device Name: | nVIDIA GeForce 6800 Ultra | |
| Device Class: | VGA Compatible Adapter | |
| Revision ID: | A1 | |
| Bus Number: | 1 | |
| Device Number: | 0 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 248 | |
| Hardware ID: | PCI\VEN_10DE&DEV_0040&SUBSYS_31411458&REV_A1 | |
| [System Resources] | ||
| Interrupt Line: | IRQ10 | |
| Interrupt Pin: | INTA# | |
| Memory Base Address 0 | F2000000 | |
| Memory Base Address 1 | E0000000 | |
| Memory Base Address 2 | F3000000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge |
| [General Information] | ||
| Device Name: | nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge | |
| Original Device Name: | nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge | |
| Device Class: | PCI-to-PCI Bridge | |
| Revision ID: | A2 | |
| Bus Number: | 0 | |
| Device Number: | 14 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_10DE&DEV_00ED&SUBSYS_00000000&REV_A2 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| PCI Bus #2 |
| Creative Technology SB Live! Player 1024 Sound Card |
| [General Information] | ||
 | Device Name: | Creative Technology SB Live! Player 1024 Sound Card | |
| Original Device Name: | Creative Technology SBLive! | |
| Device Class: | Multimedia Audio Adapter | |
| Revision ID: | 8 | |
| Bus Number: | 2 | |
| Device Number: | 10 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 32 | |
| Hardware ID: | PCI\VEN_1102&DEV_0002&SUBSYS_80271102&REV_08 | |
| [System Resources] | ||
| Interrupt Line: | IRQ9 | |
| Interrupt Pin: | INTA# | |
| I/O Base Address 0 | C000 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| Creative Technology PCI Gameport Joystick |
| [General Information] | ||
 | Device Name: | Creative Technology PCI Gameport Joystick | |
| Original Device Name: | Creative Technology Gameport Joystick | |
| Device Class: | Unknown Input Device | |
| Revision ID: | 8 | |
| Bus Number: | 2 | |
| Device Number: | 10 | |
| Function Number: | 1 | |
| PCI Latency Timer: | 32 | |
| Hardware ID: | PCI\VEN_1102&DEV_7002&SUBSYS_00201102&REV_08 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| I/O Base Address 0 | 200 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| Marvell Yukon 88E8001/3/10 Gigabit Ethernet Controller |
| [General Information] | ||
 | Device Name: | Marvell Yukon 88E8001/3/10 Gigabit Ethernet Controller | |
| Original Device Name: | Marvell Yukon 88E8001/3/10 Gigabit Ethernet Controller | |
| Device Class: | Ethernet Adapter | |
| Revision ID: | 13 | |
| Bus Number: | 2 | |
| Device Number: | 11 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 64 | |
| Hardware ID: | PCI\VEN_11AB&DEV_4320&SUBSYS_E0001458&REV_13 | |
| [System Resources] | ||
| Interrupt Line: | IRQ11 | |
| Interrupt Pin: | INTA# | |
| Memory Base Address 0 | F6000000 | |
| I/O Base Address 1 | C800 | |
| [Features] | ||
| Bus Mastering: | Enabled | |
| Running At 66 MHz: | Capable | |
| Fast Back-to-Back Transactions: | Capable | |
| AMD Hammer - HyperTransport Technology Configuration |
| [General Information] | ||
| Device Name: | AMD Hammer - HyperTransport Technology Configuration | |
| Original Device Name: | AMD Hammer - HyperTransport Technology Configuration | |
| Device Class: | Host-to-PCI Bridge | |
| Revision ID: | 0 | |
| Bus Number: | 0 | |
| Device Number: | 24 | |
| Function Number: | 0 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Disabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Not Capable | |
| [Routing Node 0] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 1] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 2] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 3 ] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 4] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 5] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 6] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Routing Node 7] | ||
| Request Route: | This node | |
| Response Route: | This node | |
| Broadcast Route: | This node | |
| [Node ID] | ||
| This Node ID: | 0 | |
| Node Count: | 1 | |
| HyperTransport I/O Hub Node ID: | 0 | |
| Lock Controller Node ID: | 0 | |
| CPU Count: | 1 | |
| [Unit ID] | ||
| CPU0 Unit ID: | 0 | |
| CPU1 Unit ID: | 1 | |
| Memory Controller Unit ID: | 2 | |
| Host Bridge Unit ID: | 3 | |
| HyperTransport I/O Hub Link ID: | LDT0 | |
| [HyperTransport Transaction Control] | ||
| Medium priority isochronous writes: | Enabled | |
| High priority isochronous writes: | Enabled | |
| Low priority writes: | Enabled | |
| High priority CPU reads: | Disabled | |
| High-priority bypass count: | 3 | |
| Medium-priority bypass count: | 3 | |
| Downstream non-posted request limit: | No limit | |
| Sequence ID source node: | Disabled | |
| APIC extended spurious vector: | Read-only (1111b) | |
| APIC extended ID: | 4 bits | |
| APIC extended broadcast ID: | 0Fh | |
| Local interrupt conversion: | Disabled | |
| Coherent HyperTransport configuration space range: | Limited | |
| Buffer release priority select: | 8 packets | |
| Change ISOC to Ordered: | Isochronous prioritization | |
| Response PassPW: | Enabled | |
| Fill probe: | Disabled | |
| Remote probe memory cancel: | Enabled | |
| Probe memory cancel: | Enabled | |
| CPU Read response PassPW: | Disabled | |
| CPU request PassPW: | Disabled | |
| CPU1: | Disabled | |
| Memory controller target start: | Enabled | |
| Write doubleword probes: | Disabled | |
| Write byte probes: | Disabled | |
| Read doubleword probe: | Disabled | |
| Read byte probe: | Disabled | |
| [HyperTransport Initialization Control] | ||
| Default Link: | CPU on same node | |
| Request: | Enabled | |
| Routing Table: | Enabled | |
| [LDT0 Capability] | ||
| Drop on Uninitialized Link: | No | |
| Inbound End-of-Chain Error: | No | |
| Act As Slave: | No | |
| Host Hide: | Yes | |
| Chain Side: | 0 | |
| Device Number: | 0 | |
| Double Ended: | No | |
| [LDT0 Link Control] | ||
| Doubleword Flow Control Out: | Disabled | |
| Link Width Out: | 16 bits | |
| Doubleword Flow Control In: | Disabled | |
| Link Width In: | 16 bits | |
| Doubleword Flow Control Out: | Not supported | |
| Max. Link Width Out: | 16 bits | |
| Doubleword Flow Control In: | Not supported | |
| Max. Link Width In: | 16 bits | |
| Extended Control Time During Initialization: | >=16 bit times | |
| HyperTransport Stop Tristate: | Disabled | |
| Isochronous: | Disabled | |
| CRC Error On Incoming Link (Higher Byte): | Not detected | |
| CRC Error On Incoming Link (Lower Byte): | Not detected | |
| Transmitter: | On | |
| Receiver: | On | |
| Initialization Complete: | Yes | |
| Link Failure: | Not detected | |
| CRC Flood: | Disabled | |
| [LDT0 Link Frequency Capability] | ||
| Link 200 MHz Frequency Capability: | Capable | |
| Link 300 MHz Frequency Capability: | Not capable | |
| Link 400 MHz Frequency Capability: | Capable | |
| Link 500 MHz Frequency Capability: | Not capable | |
| Link 600 MHz Frequency Capability: | Capable | |
| Link 800 MHz Frequency Capability: | Capable | |
| Link 1000 MHz Frequency Capability: | Capable | |
| Link 1200 MHz Frequency Capability: | Not capable | |
| Link 1400 MHz Frequency Capability: | Not capable | |
| Link 1600 MHz Frequency Capability: | Not capable | |
| Link 1800 MHz Frequency Capability: | Not capable | |
| Link 2000 MHz Frequency Capability: | Not capable | |
| Link 2200 MHz Frequency Capability: | Not capable | |
| Link 2400 MHz Frequency Capability: | Not capable | |
| Link 2600 MHz Frequency Capability: | Not capable | |
| Link 100 MHz Frequency Capability: | Capable | |
| Current Link Frequency: | 1000 MHz | |
| Link Major Revision: | 1 | |
| Link Minor Revision: | 2 | |
| [LDT0 Feature Capability] | ||
| Extended Register Set: | Not supported | |
| Extended CTL: | Not required | |
| CRC Test Mode: | Not supported | |
| HyperTransport Stop Mode: | Supported | |
| Isochronous Flow Control Mode: | Not supported | |
| [LDT0 Buffer Count] | ||
| Response Data Buffer Count: | 2 | |
| Posted Request Data Buffer Count: | 5 | |
| Request Data Buffer Count: | 1 | |
| Probe Buffer Count: | 0 | |
| Response Buffer Count: | 4 | |
| Posted Request Buffer Count: | 5 | |
| Request Buffer Count: | 6 | |
| [LDT0 Bus Number] | ||
| Subordinate Bus Number: | 255 | |
| Secondary Bus Number: | 0 | |
| Primary Bus Number: | 0 | |
| [LDT0 Type] | ||
| Link Connect Pending: | No | |
| UniP-cLDT: | Normal coherent/Noncoherent | |
| Non Coherent: | Noncoherent technology | |
| Initialization Complete: | Yes | |
| Link Connect Status: | Connected | |
| [LDT1 Capability] | ||
| Drop on Uninitialized Link: | No | |
| Inbound End-of-Chain Error: | No | |
| Act As Slave: | No | |
| Host Hide: | No | |
| Chain Side: | 0 | |
| Device Number: | 0 | |
| Double Ended: | No | |
| [LDT1 Link Control] | ||
| Doubleword Flow Control Out: | Disabled | |
| Link Width Out: | 8 bits | |
| Doubleword Flow Control In: | Disabled | |
| Link Width In: | 8 bits | |
| Doubleword Flow Control Out: | Not supported | |
| Max. Link Width Out: | 8 bits | |
| Doubleword Flow Control In: | Not supported | |
| Max. Link Width In: | 8 bits | |
| Extended Control Time During Initialization: | >=16 bit times | |
| HyperTransport Stop Tristate: | Disabled | |
| Isochronous: | Disabled | |
| CRC Error On Incoming Link (Higher Byte): | Not detected | |
| CRC Error On Incoming Link (Lower Byte): | Not detected | |
| Transmitter: | On | |
| Receiver: | On | |
| Initialization Complete: | No | |
| Link Failure: | Not detected | |
| CRC Flood: | Disabled | |
| [LDT1 Link Frequency Capability] | ||
| Link 200 MHz Frequency Capability: | Not capable | |
| Link 300 MHz Frequency Capability: | Not capable | |
| Link 400 MHz Frequency Capability: | Not capable | |
| Link 500 MHz Frequency Capability: | Not capable | |
| Link 600 MHz Frequency Capability: | Not capable | |
| Link 800 MHz Frequency Capability: | Not capable | |
| Link 1000 MHz Frequency Capability: | Not capable | |
| Link 1200 MHz Frequency Capability: | Not capable | |
| Link 1400 MHz Frequency Capability: | Not capable | |
| Link 1600 MHz Frequency Capability: | Not capable | |
| Link 1800 MHz Frequency Capability: | Not capable | |
| Link 2000 MHz Frequency Capability: | Not capable | |
| Link 2200 MHz Frequency Capability: | Not capable | |
| Link 2400 MHz Frequency Capability: | Not capable | |
| Link 2600 MHz Frequency Capability: | Not capable | |
| Link 100 MHz Frequency Capability: | Not capable | |
| Current Link Frequency: | 200 MHz | |
| Link Major Revision: | 0 | |
| Link Minor Revision: | 0 | |
| [LDT1 Feature Capability] | ||
| Extended Register Set: | Not supported | |
| Extended CTL: | Not required | |
| CRC Test Mode: | Not supported | |
| HyperTransport Stop Mode: | Not supported | |
| Isochronous Flow Control Mode: | Not supported | |
| [LDT1 Buffer Count] | ||
| Response Data Buffer Count: | 0 | |
| Posted Request Data Buffer Count: | 0 | |
| Request Data Buffer Count: | 0 | |
| Probe Buffer Count: | 0 | |
| Response Buffer Count: | 0 | |
| Posted Request Buffer Count: | 0 | |
| Request Buffer Count: | 0 | |
| [LDT1 Bus Number] | ||
| Subordinate Bus Number: | 0 | |
| Secondary Bus Number: | 0 | |
| Primary Bus Number: | 0 | |
| [LDT1 Type] | ||
| Link Connect Pending: | No | |
| UniP-cLDT: | Normal coherent/Noncoherent | |
| Non Coherent: | Coherent technology | |
| Initialization Complete: | No | |
| Link Connect Status: | Not connected | |
| [LDT2 Capability] | ||
| Drop on Uninitialized Link: | No | |
| Inbound End-of-Chain Error: | No | |
| Act As Slave: | No | |
| Host Hide: | No | |
| Chain Side: | 0 | |
| Device Number: | 0 | |
| Double Ended: | No | |
| [LDT2 Link Control] | ||
| Doubleword Flow Control Out: | Disabled | |
| Link Width Out: | 8 bits | |
| Doubleword Flow Control In: | Disabled | |
| Link Width In: | 8 bits | |
| Doubleword Flow Control Out: | Not supported | |
| Max. Link Width Out: | 8 bits | |
| Doubleword Flow Control In: | Not supported | |
| Max. Link Width In: | 8 bits | |
| Extended Control Time During Initialization: | >=16 bit times | |
| HyperTransport Stop Tristate: | Disabled | |
| Isochronous: | Disabled | |
| CRC Error On Incoming Link (Higher Byte): | Not detected | |
| CRC Error On Incoming Link (Lower Byte): | Not detected | |
| Transmitter: | On | |
| Receiver: | On | |
| Initialization Complete: | No | |
| Link Failure: | Not detected | |
| CRC Flood: | Disabled | |
| [LDT2 Link Frequency Capability] | ||
| Link 200 MHz Frequency Capability: | Not capable | |
| Link 300 MHz Frequency Capability: | Not capable | |
| Link 400 MHz Frequency Capability: | Not capable | |
| Link 500 MHz Frequency Capability: | Not capable | |
| Link 600 MHz Frequency Capability: | Not capable | |
| Link 800 MHz Frequency Capability: | Not capable | |
| Link 1000 MHz Frequency Capability: | Not capable | |
| Link 1200 MHz Frequency Capability: | Not capable | |
| Link 1400 MHz Frequency Capability: | Not capable | |
| Link 1600 MHz Frequency Capability: | Not capable | |
| Link 1800 MHz Frequency Capability: | Not capable | |
| Link 2000 MHz Frequency Capability: | Not capable | |
| Link 2200 MHz Frequency Capability: | Not capable | |
| Link 2400 MHz Frequency Capability: | Not capable | |
| Link 2600 MHz Frequency Capability: | Not capable | |
| Link 100 MHz Frequency Capability: | Not capable | |
| Current Link Frequency: | 200 MHz | |
| Link Major Revision: | 0 | |
| Link Minor Revision: | 0 | |
| [LDT2 Feature Capability] | ||
| Extended Register Set: | Not supported | |
| Extended CTL: | Not required | |
| CRC Test Mode: | Not supported | |
| HyperTransport Stop Mode: | Not supported | |
| Isochronous Flow Control Mode: | Not supported | |
| [LDT2 Buffer Count] | ||
| Response Data Buffer Count: | 0 | |
| Posted Request Data Buffer Count: | 0 | |
| Request Data Buffer Count: | 0 | |
| Probe Buffer Count: | 0 | |
| Response Buffer Count: | 0 | |
| Posted Request Buffer Count: | 0 | |
| Request Buffer Count: | 0 | |
| [LDT2 Bus Number] | ||
| Subordinate Bus Number: | 0 | |
| Secondary Bus Number: | 0 | |
| Primary Bus Number: | 0 | |
| [LDT2 Type] | ||
| Link Connect Pending: | No | |
| UniP-cLDT: | Normal coherent/Noncoherent | |
| Non Coherent: | Coherent technology | |
| Initialization Complete: | No | |
| Link Connect Status: | Not connected | |
| AMD Hammer - Address Map |
| [General Information] | ||
| Device Name: | AMD Hammer - Address Map | |
| Original Device Name: | AMD Hammer - Address Map | |
| Device Class: | Host-to-PCI Bridge | |
| Revision ID: | 0 | |
| Bus Number: | 0 | |
| Device Number: | 24 | |
| Function Number: | 1 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Disabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Not Capable | |
| [DRAM Base 0] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | Read/Write | |
| [DRAM Limit 0] | ||
| DRAM Limit Address: | 3F000000 | |
| Interleave: | None | |
| Destination Node ID: | 0 | |
| [DRAM Base 1] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 1] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 1 | |
| [DRAM Base 2] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 2] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 2 | |
| [DRAM Base 3] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 3] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 3 | |
| [DRAM Base 4] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 4] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 4 | |
| [DRAM Base 5] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 5] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 5 | |
| [DRAM Base 6] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 6] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 6 | |
| [DRAM Base 7] | ||
| DRAM Base Address: | 000 | |
| Interleave: | None | |
| Access: | No access | |
| [DRAM Limit 7] | ||
| DRAM Limit Address: | 000 | |
| Interleave: | None | |
| Destination Node ID: | 7 | |
| [Memory-Mapped I/O Base 0] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 0] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 1] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 1] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 2] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 2] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 3] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 3] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 4] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 4] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 5] | ||
| Memory-Mapped I/O Base Address: | 000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | No access | |
| [Memory-Mapped I/O Limit 5] | ||
| Memory-Mapped I/O Limit Address: | 000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 6] | ||
| Memory-Mapped I/O Base Address: | A0000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | Read/Write | |
| [Memory-Mapped I/O Limit 6] | ||
| Memory-Mapped I/O Limit Address: | B0000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Memory-Mapped I/O Base 7] | ||
| Memory-Mapped I/O Base Address: | 40000000 | |
| Lock: | Unlocked | |
| CPU Access: | Enabled | |
| Access: | Read/Write | |
| [Memory-Mapped I/O Limit 7] | ||
| Memory-Mapped I/O Limit Address: | FF700000 | |
| Non-Posted: | Posted | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [PCI I/O Base 0] | ||
| PCI I/O Base Address: | 0 | |
| ISA Enable: | Disabled | |
| VGA Enable: | Disabled | |
| Access: | No access | |
| [PCI I/O Limit 0] | ||
| PCI I/O Limit Address: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [PCI I/O Base 1] | ||
| PCI I/O Base Address: | 1 | |
| ISA Enable: | Disabled | |
| VGA Enable: | Enabled | |
| Access: | Read/Write | |
| [PCI I/O Limit 1] | ||
| PCI I/O Limit Address: | FF | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [PCI I/O Base 2] | ||
| PCI I/O Base Address: | 0 | |
| ISA Enable: | Disabled | |
| VGA Enable: | Disabled | |
| Access: | No access | |
| [PCI I/O Limit 2] | ||
| PCI I/O Limit Address: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [PCI I/O Base 3] | ||
| PCI I/O Base Address: | 0 | |
| ISA Enable: | Disabled | |
| VGA Enable: | Disabled | |
| Access: | No access | |
| [PCI I/O Limit 3] | ||
| PCI I/O Limit Address: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| [Config Base and Limit 0] | ||
| Bus Number Limit: | FF | |
| Bus Number Base: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| Device Number Compare: | Disabled | |
| Access: | Read/Write | |
| [Config Base and Limit 1] | ||
| Bus Number Limit: | 0 | |
| Bus Number Base: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| Device Number Compare: | Disabled | |
| Access: | No access | |
| [Config Base and Limit 2] | ||
| Bus Number Limit: | 0 | |
| Bus Number Base: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| Device Number Compare: | Disabled | |
| Access: | No access | |
| [Config Base and Limit 3] | ||
| Bus Number Limit: | 0 | |
| Bus Number Base: | 0 | |
| Destination Link ID: | 0 | |
| Destination Node ID: | 0 | |
| Device Number Compare: | Disabled | |
| Access: | No access | |
| [DRAM Hole] | ||
| DRAM Hole Base Address: | 0 | |
| DRAM Hole Offset: | 0 | |
| DRAM Hole Enable: | Disabled | |
| AMD Hammer - DRAM Controller |
| [General Information] | ||
| Device Name: | AMD Hammer - DRAM Controller | |
| Original Device Name: | AMD Hammer - DRAM Controller | |
| Device Class: | Host-to-PCI Bridge | |
| Revision ID: | 0 | |
| Bus Number: | 0 | |
| Device Number: | 24 | |
| Function Number: | 2 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Disabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Not Capable | |
| [DRAM CS Base Address 0] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Enabled | |
| [DRAM CS Base Address 1] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Base Address 2] | ||
| Base Address: | 10000 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Enabled | |
| [DRAM CS Base Address 3] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Base Address 4] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Base Address 5] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Base Address 6] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Base Address 7] | ||
| Base Address: | 00 | |
| Memory Test: | Passed | |
| Spare Rank: | Not | |
| Chip-Select Bank: | Disabled | |
| [DRAM CS Mask 0] | ||
| Address Mask: | 3E0EE000 | |
| [DRAM CS Mask 1] | ||
| Address Mask: | 00 | |
| [DRAM CS Mask 2] | ||
| Address Mask: | 3E0EE000 | |
| [DRAM CS Mask 3] | ||
| Address Mask: | 00 | |
| [DRAM CS Mask 4 [Sub F]] | ||
| Address Mask: | 00 | |
| [DRAM CS Mask 5 [Sub F]] | ||
| Address Mask: | 00 | |
| [DRAM CS Mask 6 [Sub F]] | ||
| Address Mask: | 00 | |
| [DRAM CS Mask 7 [Sub F]] | ||
| Address Mask: | 00 | |
| AMD Hammer - Miscellaneous Control |
| [General Information] | ||
| Device Name: | AMD Hammer - Miscellaneous Control | |
| Original Device Name: | AMD Hammer - Miscellaneous Control | |
| Device Class: | Host-to-PCI Bridge | |
| Revision ID: | 0 | |
| Bus Number: | 0 | |
| Device Number: | 24 | |
| Function Number: | 3 | |
| PCI Latency Timer: | 0 | |
| Hardware ID: | PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00 | |
| [System Resources] | ||
| Interrupt Line: | N/A | |
| Interrupt Pin: | N/A | |
| [Features] | ||
| Bus Mastering: | Disabled | |
| Running At 66 MHz: | Not Capable | |
| Fast Back-to-Back Transactions: | Not Capable | |
| [MCA NB Control] | ||
| DRAM Parity Error Reporting [F]: | Disabled | |
| Watchdog Timer Error Reporting: | Disabled | |
| Atomic Read-Modify-Write Error Reporting: | Disabled | |
| GART Table Walk Error Reporting: | Disabled | |
| Target Abort Error Reporting: | Disabled | |
| Master Abort Error Reporting: | Disabled | |
| HyperTransport Link 2 Sync Packet Error Reporting: | Disabled | |
| HyperTransport Link 1 Sync Packet Error Reporting: | Disabled | |
| HyperTransport Link 0 Sync Packet Error Reporting: | Disabled | |
| HyperTransport Link 2 CRC Error Reporting: | Disabled | |
| HyperTransport Link 1 CRC Error Reporting: | Disabled | |
| HyperTransport Link 0 CRC Error Reporting: | Disabled | |
| Uncorrectable ECC Error Reporting: | Disabled | |
| Correctable ECC Error Reporting: | Disabled | |
| [MCA NB Configuration] | ||
| Sync Flood on DRAM Address Parity Error [F]: | Disabled | |
| Master Abort CPU Error Response [F]: | Enabled | |
| Target Abort CPU Error Response [F]: | Enabled | |
| Northbridge MCA to CPU 0: | Disabled | |
| PCI Configuration CPU Error Response: | Enabled | |
| I/O Read Data Error Log: | Disabled | |
| Chip-Kill ECC Mode: | Disabled | |
| ECC: | Disabled | |
| Sync Flood On Any Error: | Disabled | |
| Sync Flood on Watchdog Timer Error: | Disabled | |
| HyperTransport Link Select for CRC Error Generation: | Link 0 | |
| Watchdog Timer Time Base: | 1 ms | |
| Watchdog Timer Count: | 4095 | |
| Watchdog Timer: | Enabled | |
| I/O Error Response: | Enabled | |
| CPU Error Response: | Disabled | |
| I/O Master Abort Error Response: | Enabled | |
| Sync Packet Propagation: | Enabled | |
| Sync Packet Generation: | Enabled | |
| Sync Flood on Uncorrectable ECC Error: | Disabled | |
| CPU Read Data Error Log: | Disabled | |
| CPU ECC Error Log: | Disabled | |
| [SRI-to-XBAR Buffer Count] | ||
| Downstream Posted Request Buffer Count: | 1 | |
| Downstream Request Buffer Count: | 1 | |
| Upstream Response Data Buffer Count: | 1 | |
| Display Refresh Request Buffer Count: | 0 | |
| Request Data Buffer Count: | 0 | |
| Upstream Response Buffer Count: | 1 | |
| Upstream Posted Request Buffer Count: | 1 | |
| Upstream Request Buffer Count: | 1 | |
| [XBAR-to-SRI Buffer Count] | ||
| Downstream Posted Request Buffer Count: | 1 | |
| Downstream Request Buffer Count: | 1 | |
| Display Refresh Request Buffer Count: | 0 | |
| Probe Buffer Count: | 8 | |
| Upstream Posted Request Buffer Count: | 1 | |
| Upstream Request Buffer Count: | 1 | |
| [MCT-to-XBAR Buffer Count] | ||
| Response Data Buffer Count: | 8 | |
| Probe Buffer Count: | 3 | |
| Response Buffer Count: | 8 | |
| [Free List Buffer Count] | ||
| SRI to XBAR Free Response Data Buffer Count: | 2 | |
| SRI to XBAR Free Response Buffer Count: | 2 | |
| SRI to XBAR Free Request Buffer Count: | 1 | |
| SRI Free Command Buffer Count: | 3 | |
| [Power Management Control] | ||
| Power Management Mode 7 Clock Divisor: | 32 | |
| Power Management Mode 7 Alternate VID Change: | Disabled | |
| Power Management Mode 7 FID/VID Change: | Disabled | |
| Power Management Mode 7 NB Low Power: | Disabled | |
| Power Management Mode 7 CPU Low Power: | Enabled | |
| Power Management Mode 6 Clock Divisor: | 16 | |
| Power Management Mode 6 Alternate VID Change: | Disabled | |
| Power Management Mode 6 FID/VID Change: | Disabled | |
| Power Management Mode 6 NB Low Power: | Enabled | |
| Power Management Mode 6 CPU Low Power: | Enabled | |
| Power Management Mode 5 Clock Divisor: | 32 | |
| Power Management Mode 5 Alternate VID Change: | Disabled | |
| Power Management Mode 5 FID/VID Change: | Disabled | |
| Power Management Mode 5 NB Low Power: | Disabled | |
| Power Management Mode 5 CPU Low Power: | Enabled | |
| Power Management Mode 4 Clock Divisor: | 16 | |
| Power Management Mode 4 Alternate VID Change: | Disabled | |
| Power Management Mode 4 FID/VID Change: | Disabled | |
| Power Management Mode 4 NB Low Power: | Enabled | |
| Power Management Mode 4 CPU Low Power: | Enabled | |
| Power Management Mode 3 Clock Divisor: | 32 | |
| Power Management Mode 3 Alternate VID Change: | Disabled | |
| Power Management Mode 3 FID/VID Change: | Disabled | |
| Power Management Mode 3 NB Low Power: | Enabled | |
| Power Management Mode 3 CPU Low Power: | Enabled | |
| Power Management Mode 2 Clock Divisor: | 8 | |
| Power Management Mode 2 Alternate VID Change: | Disabled | |
| Power Management Mode 2 FID/VID Change: | Enabled | |
| Power Management Mode 2 NB Low Power: | Enabled | |
| Power Management Mode 2 CPU Low Power: | Enabled | |
| Power Management Mode 1 Clock Divisor: | 8 | |
| Power Management Mode 1 Alternate VID Change: | Disabled | |
| Power Management Mode 1 FID/VID Change: | Disabled | |
| Power Management Mode 1 NB Low Power: | Disabled | |
| Power Management Mode 1 CPU Low Power: | Disabled | |
| Power Management Mode 0 Clock Divisor: | 8 | |
| Power Management Mode 0 Alternate VID Change: | Disabled | |
| Power Management Mode 0 FID/VID Change: | Disabled | |
| Power Management Mode 0 NB Low Power: | Disabled | |
| Power Management Mode 0 CPU Low Power: | Disabled | |
| [GART Aperture Control] | ||
| GART Table Walk Probes: | Enabled | |
| GART I/O Accesses: | Enabled | |
| GART CPU Accesses: | Enabled | |
| GART Size: | 32 MBytes | |
| GART: | Enabled | |
| [GART Aperture Base] | ||
| GART Aperture Base Address: | F0000000 | |
| [GART Table Base] | ||
| GART Table Base Address: | 2FFB6000 | |
| [Clock Power/Timing] | ||
| HyperTransport CLK PLL Lock Counter: | 13 | |
| Link Reconnect Delay: | 10 us | |
| Clock Ramp Hysteresis: | 2000 ns | |
| Time to Drive Sleep VID: | 0 system clocks | |
| Good Phase Error: | 400(B)/200(C) system clocks | |
| Ramp VID Offset: | 0 mV | |
| Alternate VID: | 0 | |
| Voltage Regulator Stabilization Time: | 0 ns | |
| [HyperTransportt FIFO Read Pointer Optimization] | ||
| Change Read Pointer For HyperTransport Link 2 Transmitter: | RdPtr assigned by hardware | |
| Change Read Pointer For HyperTransport Link 2 Receiver: | RdPtr assigned by hardware | |
| Change Read Pointer For HyperTransport Link 1 Transmitter: | RdPtr assigned by hardware | |
| Change Read Pointer For HyperTransport Link 1 Receiver: | RdPtr assigned by hardware | |
| Change Read Pointer For HyperTransport Link 0 Transmitter: | RdPtr assigned by hardware | |
| Change Read Pointer For HyperTransport Link 0 Receiver: | RdPtr assigned by hardware | |
| [Thermtrip Status] | ||
| Case Temperature Specification (TCaseMax) [Rev E]: | Not defined | |
| Diode Offset Sign [Rev E]: | Positive | |
| Tj Offset [Rev F]: | 8 °C | |
| Current Temperature [Rev F]: | 36 °C | |
| Diode Offset: | 7 °C | |
| Thermtrip Enabled: | Enabled | |
| Thermtrip Sense (Core1): | Occurs | |
| Thermtrip Sense (Core0): | Occurs | |
| Thermtrip Status: | Occurs | |
| [Northbridge Capabilities] | ||
| Multi-Core Capability: | Single-Core | |
| HTC (Hardware Thermal Control): | Capable | |
| On-chip Memory Controller: | Capable | |
| Maximum DRAM Frequency: | No limit | |
| Chip-Kill ECC: | Capable | |
| ECC: | Capable | |
| Big MP: | Not capable | |
| MP: | Not capable | |
| 128-Bit DRAM: | Capable | |
| Video Adapter |
| nVIDIA GeForce 6800 Ultra |
| [Video chipset] | ||
| Video Chipset: | nVIDIA GeForce 6800 Ultra | |
| Video Chipset Codename: | NV40 | |
| Video Memory: | Unknown | |
| [Video Card] | ||
| Video Card: | GIGABYTE GV-N68U256D | |
| Video Bus: | AGP 8X | |
| Video BIOS Version: | 5.40.02.15.00 | |
| Video Chipset Revision: | A1 | |
| [Performance] | ||
| Processor Clock: | 100.0 MHz | |
| Memory Bus Width: | 64-bit | |
| Hardware ID: | PCI\VEN_10DE&DEV_0040&SUBSYS_31411458&REV_A1 | |
| Monitor |
| DELL U3011 (Digital) |
| [General information] | ||
 | Monitor Name: | DELL U3011 (Digital) | |
| Monitor Name (Manuf): | DELL U3011 | |
| Serial Number: | PH5NY12I226L | |
| Date Of Manufacture: | Week: 7, Year: 2011 | |
| Monitor Hardware ID: | Monitor\DEL4063 | |
| Max. Vertical Size: | 40 cm | |
| Max. Horizontal Size: | 64 cm | |
| Horizontal Frequency: | 29 - 113 kHz | |
| Vertical Frequency: | 49 - 86 Hz | |
| Maximum Pixel Clock: | 280 MHz | |
| [Advanced parameters] | ||
| Input Signal: | Digital | |
| Display Type: | RGB color | |
| Gamma Factor: | 2.20 | |
| [DPMS Modes] | ||
| Standby: | Supported | |
| Suspend: | Supported | |
| Active Off: | Supported | |
| Standard Colour Space: | Not Supported | |
| Preferred Timing Mode: | Supported | |
| Default GTF Supported: | Not Supported | |
| DFP 1.x Compatible: | No | |
| [Supported Video Modes] | ||
| 1152 x 864 | 75 Hz | |
| 1280 x 800 | 60 Hz | |
| 1280 x 1024 | 60 Hz | |
| 1600 x 1200 | 60 Hz | |
| 1920 x 1200 | 60 Hz | |
| 1920 x 1440 | 60 Hz | |
| 2560 x 1600 | 641 x 401 mm, Pixel Clock 268.50 MHz | |
| Drives |
| Floppy Drives |
| (S)ATA/ATAPI Drives |
| Audio |
| Creative Technology SB Live! Player 1024 Sound Card |
| Audio Adapter: | Creative Technology SB Live! Player 1024 Sound Card | |
| Audio Controller Hardware ID: | PCI\VEN_1102&DEV_0002&SUBSYS_80271102&REV_08 |
| Network |
| Marvell Yukon 88E8001/3/10 Gigabit Ethernet Controller |
| [General information] | ||
| Network Card: | Marvell Yukon 88E8001/3/10 Gigabit Ethernet Controller | |
| Vendor Description: | Unknown | |
| MAC Address: | Unknown | |
| [Capabilities] | ||
| Maximum Link Speed: | Unknown | |
| Transmit Buffer Size: | Unknown | |
| Receive Buffer Size: | Unknown | |
| Hardware ID: | PCI\VEN_11AB&DEV_4320&SUBSYS_E0001458&REV_13 | |
| Ports |
| Serial Ports |
| Parallel Ports |
| USB |
| Root Hub |
| [Port1] : No Device Connected |
| [Port2] : No Device Connected |
| [Port3] : No Device Connected |
| [Port4] : No Device Connected |
| Root Hub |
| [Port1] : No Device Connected |
| [Port2] : No Device Connected |
| [Port3] : No Device Connected |
| [Port4] : No Device Connected |
| Root Hub |
| [Port1] : No Device Connected |
| [Port2] : No Device Connected |
| [Port3] : No Device Connected |
| [Port4] : No Device Connected |
| [Port5] : No Device Connected |
| [Port6] : No Device Connected |
| [Port7] : No Device Connected |
| [Port8] : No Device Connected |